Home » SPINE BRACES » Thoracic orthoses » Back orthosis AM-PES-01 BLACK

Back orthosis AM-PES-01 BLACK

Back orthosis AM-PES-01 BLACK
4medic-en
Upper back braceUpper back brace
Class I medical deviceClass I medical device
DurableDurable
InnovativeInnovative
InvisibleInvisible
Latex-freeLatex-free
Recommended by specialistsRecommended by specialists
Skin-friendlySkin-friendly
Brand: Code UNSPSC:

POSTURE BRACE WITH STAYS

Description

Up-right holder consists of elastic tapes made of ActiveRubber II™ and CottonComfort™ and back pelotte, made of Active 3D™ and equipped with orthopaedic nibs. Back pelotte is attached to the elastic shoulder tapes going through the shoulders and crossing in the loins area of the spine and fastened on the belly. Such construction of the product guarantees correction of the posture for adults as well as children. Special lining protects the tapes from rippling and makes the tape stick to the patient’s body.

Properties

– SKIN FRIENDLY PRODUCT- up-right holder has been made of orthopaedic rubber, which is neutral to patient’s skin
– EFFECTIVENSS OF STABILIZATION- thanks to 4 orthopaedic nibs the stabilization is exceptionally good.
– COMFORT OF USAGE- its usage of the up-right holder is comfortable- thanks to its skin-color it is hardly noticeable on patient’s body.

Purpose of use

The up-right holder should be used in following cases:
– injury of the shoulder which doesn’t require surgery
– pains of the chest area of the spine
– increased chest kyphosis
– required correction

Sizes

Size The circumference of the chest at the height of the xiphoid appendix How to measure
S 70 – 80 cm
(27,6″ – 31,5″)
The circumference of the chest at the height of the xiphoid appendix
M 80 – 90 cm
(31,5″ – 35,4″)
L 90 – 100 cm
(35,4″ – 39,4″)
XL 100 – 125 cm
(39,4″ – 49.2″)
2XL 125 – 140 cm
(49.2″ – 55,1″)
Size Total height of the product
front rear
S 6 cm (2,4″) 25 cm (9,8″)
M
L 32 cm (12,6″)
XL
2XL

Colors

Gallery

Click on the photo to enlarge

AM-PES-01/AM-PES-01/AM-PES-01/AM-PES-01/AM-PES-01/AM-PES-01/AM-PES-01/AM-PES-01/

Technology

MATERIALS

Active3D™

Active3D™ is thermoformed fabric made of special foamed, cell-closed designed material. It reduces the pressure on the body or any abrasions made by orthopaedic stays and aluminum splints. It is fully waterproof fabric and does not absorb sweat. It’s easy to clean. Due to its features, the fabric is an excellent product for making medical orthopaedic braces and orthoses. ACTIVE 3D™ has various external self-gripping layers. Our material has special, thermoformed properties and may be shaped according to the functional goals of the final braces.

ActiveRubber II™

ActiveRubber II™ is strong and bidirectional elasticity. It can be stretched, increasing the length and width, what improves compression. Between the braids air flows freely and skin can breathe. In addition in high compression, these rubber braids provide a gentle massage for skin. Our orthopedic rubber is very friendly for skin.

CottonComfort™

CottonComfort™ is one of the most comfortable, antiallergic and ecological orthopedic fabric that we use in the production of our products. This raw material consists of a very comfortable polyurethane foam, laminated on one or both sides with a soft and comfortable cotton knit. The knit is made of natural cotton, without any chemicals containing formaldehyde. It is certified by Oeko-Tex® Standard 100, which guarantees safety to the patient's skin. The lamination process takes place without the use of any kinds of glue, but with the use of the flame method, which changes the surface of the polyurethane foam into a sticky surface to which the outer facings of the raw material stick. Thanks to the use of such a production technology, we do not unnecessarily introduce chemical chemicals into the structure of the raw material and we ensure a very high strength of such a connection. CottonComfort™ is used in orthoses in the most delicate places, so as not to cause skin irritation and so that the soft structure of the material tightly fills the free spaces between the orthosis and the patient's body.

STIFFENINGS

Plastic stays

They come in various widths and thicknesses, are made of various types of plastics, such as polyamide, ABS or acrylic, and these features determine their stiffness. Thanks to their design, they are resistant to water, moisture and sweat. Products equipped with them can be washed without having to remove them from the orthosis. Our plastic stays work only in one direction, perfectly stabilize the laterally protected part of the body, adjusting to it at the same time and have a memory function, thanks to which they always return to their original shape. This function causes the stays in the orthosis to stabilize the swollen limb immediately after the injury and after the swelling has come off. The plastic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

PADDINGS

3D supports

3D relief supports are independent technical solutions to relieve the rigid elements of a given orthosis. These elements are made of supporting foams or EVA foam. These foams are connected with various types of skin-friendly materials and materials with an adhesive function. These pads have the appropriate shape and color adapted to the type of orthosis. They relieve both metal elements of orthoses, such as splints, stays, underwires and orthopedic drop locks, as well as other elements that should not come into direct contact with the patient's skin. These pads have an anatomical shape and are made of comfortable foam with proper hardness and elasticity, guaranteeing the proper therapeutic effect.

Setting up

Downloads

Accessories

ACCESSORIES / PRODUCTS TO BE USED WITH

Code AM-PES-01
Trade Name BACK ORTHOSIS
Model AM-PES-01

ON OUR WEBSITE WE PRESENT MEDICAL DEVICES.
USE THEM ACCORDING TO THE INSTRUCTIONS FOR USE OR LABEL.

CEMDClass I medical device in accordance with Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017. on medical devices.

MANUFACTURER / ADVERTISING ENTITY: REH4MAT Sp. z o.o.