Elbow orthosis AM-KG-AR/1R

1		1R drop-lock with adjustment of range of motion in every 15 degrees.
2		Unicentric splints made of lightweight high quality plastic with carbon fibres.
3		Wrap around straps with Velcro closures.
4		Chest belt for keeping the arm in adduction.
5		Many buckles for easy application.
6		Adjustable shoulder strap for perfect fitting.
7		Shoulder pad which does not irritate the shoulder and neck.
8		Forearm strap keeps the wrist in neutral position and prevents against the degeneration.
9		Thermoformed parts for reducing the pressure of the hard elements.

Purpose of use

• Stable fractures in elbow, humerus and forearm area,
• Chronic elbow injuries,
• Elbow hyperextension,
• Range of motion control,
• Tendons and ligaments injuries and repairs

Size	The length from the lateral epicondyle of the humerus to the wrist	How to measure
S	17-22 cm (6,7″-8,7″)
M	22-27 cm (8,9″-10,7″)
L	28 cm (10,8″) and more

Size	Arm circumference 6 cm above the center of the elbow (A)	Forearm circumference 6 cm below the center of the elbow (B)	How to measure
Single size	min 22 cm – max 44 cm (min 8,7″ – max 17,3″)	min 22 cm – max 36 cm (min 8,7″ – max 14,2″)

Universal product for right and left hand
Total length of the product: 37 cm (14.6″)

Click on the photo to enlarge

MATERIALS

Active3D™

Active3D™ is thermoformed fabric made of special foamed, cell-closed designed material. It reduces the pressure on the body or any abrasions made by orthopaedic stays and aluminum splints. It is fully waterproof fabric and does not absorb sweat. It’s easy to clean. Due to its features, the fabric is an excellent product for making medical orthopaedic braces and orthoses. ACTIVE 3D™ has various external self-gripping layers. Our material has special, thermoformed properties and may be shaped according to the functional goals of the final braces.

STIFFENINGS

Splint 1R

1R splints – single axis orthopedic splints used in all knee joint and upper limb braces, where apart from adjustment of the flection and extension angle, high lateral stabilization of the joint is not required, but important if low weight of the brace. Due to the low weight the splints are successfully used in all braced for children. They are manufactured with high quality polyamide with carbon fibres, making the splints light and neutral to the influence of sweat and salt, properly firm therefore assuring correct functioning of the device. Adjustment of the flexion and extension angle is performed with special Allen screw in every 15°. Each brace is equipped with an Allen key, which is necessary for adjustment. Standard length of the braces is: 280 and 380 mm. The splint and its design are patented in European Union by Reh4Mat Company.

• Download the splint adjustment instructions

PADDINGS

3D supports

3D relief supports are independent technical solutions to relieve the rigid elements of a given orthosis. These elements are made of supporting foams or EVA foam. These foams are connected with various types of skin-friendly materials and materials with an adhesive function. These pads have the appropriate shape and color adapted to the type of orthosis. They relieve both metal elements of orthoses, such as splints, stays, underwires and orthopedic drop locks, as well as other elements that should not come into direct contact with the patient's skin. These pads have an anatomical shape and are made of comfortable foam with proper hardness and elasticity, guaranteeing the proper therapeutic effect.

• Declaration of Conformity EC
• Manual
• Manual (other languages)
• Setting up

ACCESSORIES / PRODUCTS TO BE USED WITH

Protective sleeve for the brace AM-RB