Home » SPINE BRACES » Lumbar-sacral orthoses (LSO) » Torso support OT-03

Torso support OT-03

Torso support OT-03
4classic-en
LSOLSO
BreathableBreathable
Class I medical deviceClass I medical device
Recommended by specialistsRecommended by specialists
Skin-friendlySkin-friendly
Spiral boningsSpiral bonings
Brand: Code UNSPSC: Code UMDNS:
Code NFZ:

LUMBOSACRAL BRACE WITH REMOVABLE STRAPS

Description

With increasing age our spine carries the growing weight, but when it says “enough!”, it turns out that your spine rules your body. Without it we can’t even move the smll finger. Every day we stress our backbone by daily activities such as washing the dishes, cleaning or cooking. When you feel the pain in L-S region you should apply our spine brace OT-03 prophylactically.

The brace is anatomic-shaped what allows the brace to fit to every build.

Lateral parts of the device are made of perforated orthopaedic foam that has one-direction elasticity. This perforation allows skin to breath what improves the comfort of using.

Schematic drawing of the AirRubber™ fabric:

Depending on the size, there are 4 or 6 orthopaedic spiral bonings in the rear part.

The device is equipped with removable straps and works in two steps. During severe pain it is necessary to wear complete brace, but when the pain is reducing you can remove the straps what decreases the level of stabilization and make the brace lighter and more comfortable.

The fastener is asymmetric. This solution allows to fit the brace to the body in range of the one size.

OT-03

Spine brace OT-03, thanks to anatomic-shaped splints, stabilizes and supports spine in L-S part. It supports the abdominal wall and has the analgesic properties thanks to compression and regular temperature. The brace improves mobility, reduces and prevents against the pain and increases the quality of life.

Purpose of use

  • severe L-S syndrome
  • L-S degeneration
  • lumbar discopathy
  • after surgeries
  • lumbar deformities
  • lumbosacral spine stressed

Sizes

Size Waist circumference How to measure
S 65-75 cm
(25,6″-29,5″)
Waist circumference
M 75-85 cm
(29,5″-33,5″)
L 85-97 cm
(33,5″-38,2″)
XL 97-110 cm
(38,2″-43,3″)
XXL 110-125 cm
(43,3″-49,2″)
XXXL 125-145 cm
(49,2″-57,1″)

Total height of the product:
front: 15 cm (5,9″)
rear: 29 cm (11,4″)

Gallery

Click on the photo to enlarge

OT-03/OT-03/OT-03/OT-03/OT-03/OT-03/OT-03/

Technology

MATERIALS

AirRubber™

AirRubber™ has unidirectional elasticity and it’s breathable. This lamination is perforated. Between the braids air flows freely and skin can breathe. In addition in high compression, these rubber braids provide a gentle massage for skin. Our orthopedic rubber is very friendly for skin.

SoftComfort™

SoftComfort™ - a material specially designed to relieve very delicate places on the patient's body. The cover knit used in the production is made in such a way that it can come into contact with very sensitive skin. This raw material has the Oeko-Tex Standard 100 certificate and complies with the European REACH standard. The structure of the material consists of a very soft comfort foam laminated with a delicate cover knit. The fabric has a perforation that facilitates the flow of air through the material and allows the skin to breathe. The SoftComfort™ material is perfect for the production of linings relieving the rigid and inflexible elements of orthopedic orthoses.

STIFFENINGS

Orthopedic profiled stays

Orthopedic stays are made of special spring steel, covered with a plastic coating and have rounded and protected ends. They can come in various widths and thicknesses as well as different hardness. They can be pre-shaped or flat. They work in one direction and adapt to the shape of the body while stabilizing the laterally protected part of the body. They are perfectly protected against corrosion, so they are resistant to water, moisture and sweat. Products equipped with them can be washed without removing them from the orthosis. They adjust to the body. The orthopedic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

Orthopedic profiled stays

Plastic stays

They come in various widths and thicknesses, are made of various types of plastics, such as polyamide, ABS or acrylic, and these features determine their stiffness. Thanks to their design, they are resistant to water, moisture and sweat. Products equipped with them can be washed without having to remove them from the orthosis. Our plastic stays work only in one direction, perfectly stabilize the laterally protected part of the body, adjusting to it at the same time and have a memory function, thanks to which they always return to their original shape. This function causes the stays in the orthosis to stabilize the swollen limb immediately after the injury and after the swelling has come off. The plastic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

Setting up

Downloads

Accessories

ACCESSORIES / PRODUCTS TO BE USED WITH

Code OT-03
Trade Name TORSO SUPPORT
Model Back brace OT-03

ON OUR WEBSITE WE PRESENT MEDICAL DEVICES.
USE THEM ACCORDING TO THE INSTRUCTIONS FOR USE OR LABEL.

CEMDClass I medical device in accordance with Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017. on medical devices.

MANUFACTURER / ADVERTISING ENTITY: REH4MAT Sp. z o.o.