LOWER LIMB BRACE WITH 15° ROM ADJUSTMENT
6 POINT BRACES
The braces are intended for long-time using in patients with complicated knee instability (partly or complete ACL rupture), which is result of early injuries (before or postoperative) or after joint conditions.
The long closed brace is made of innovative material ProSIX, which fits to limb’s shape precisely by stretching into all directions. The external side ProSIX is the reticulated textile, which fits to every surface and stabilizes knee precisely. This material assures great durability and resistance to mechanical damages. Thank to that, the brace can be used by patients during the long-term rehabilitation process. The medial layer of ProSIX is the duothermal distance foam, which is responsible for adequate thermal compression and skin breathing. The internal side is the terry material, which is soft for the patient’s skin and reduces the sweat.
The device is equipped with two independent support straps made of VELCRO tapes, two 2-axial sides splints 1R orthodesign with ROM adjustment in every 15° possibility and profiles patella support with antimycotic properties. This part of the brace is supported by elastic tapes.
To better compression we provide the anatomic profiled splints 1R orthodesign, which increase the control of knee movement and provide additionally support. This solution allows to maintain the hinge in the knee axis during movement.
Purpose of use
The long close brace with 1R ROM adjustment should be applied in cases of:
- knee dislocation,
- knee twist and sprain,
- side instability of the knee joint,
- knee ligaments LCL, MCL and ACL injuries
- knee ligaments reconstruction,
- other surgeries (orthopedic).
|Size||(A) Thigh circumference 15 cm above the center of the patella||(B) Calf circumference 15 cm below the center of the patella||How to measure|
|S||40-44 cm||30-34 cm|
|M||44,5-48 cm||34,5-38 cm|
|L||48,5-52 cm||38,5-42 cm|
|XL||52,5-56 cm||42,5-46 cm|
|XXL||56,5-60 cm||46,5-50 cm|
|XXXL||60,5-64 cm||50,5-54 cm|
|XXXXL||64,5-68 cm||54,5-58 cm|
Left/right side available.
1R orthodesign splints
The orthopaedic splints 1R is the innovative solution with flexion and extension adjustment. The drop lock is very small (diameter: 30 mm) and provides 15° ROM adjustment. In addition, we apply the allen screws, which are mounted by steel pins and magnet. The most innovative is the blocking disk with the ratchet, which ensures required angle of ROM. In the short knee braces the splints 1R are universal, so they fit for both legs, but in the long knee braces the splints 1R have anatomic shape for right or left leg.
Medical products class 1 – conforming the directive of the Board (93/42/EWG) concerning medical products. Producer of orthopedic and medical products, firma REH4MAT issued appropriate EC declaration of conformity.