REAR OPEN LONG KNEE BRACE WITH ROM ADJUSTMENT
OKD-07 knee brace is made of innovative fabric called ProSix.
ProSix is one of the best technologies on the worldwide orthopaedic market. This solution based on foam cells connected with elastic 3D fabric and cotton membrane. ProSix is very good quality breathable fabric that maintains the skin dry. The braces made of this textile are very light and skin-friendly and provide excellent joint stabilization.
Our brace construction is unique because it has wrap around knee brace function (it’s easy to putting on) and closed brace function (very good patella and knee stabilization because of anatomic-shaped patella donut).
In addition, the brace has open popliteal fossa, what improves comfort of use and allows skin to breath.
OKD-07 knee brace is equipped with four pairs of circumferential straps and two 1R orthodesign splints with ROM adjustment. The orthopaedic splints 1R is the innovative solution with flexion and extension adjustment. The drop lock is very small (diameter: 30 mm) and provides 15° ROM adjustment. In addition, we apply the allen screws, which are mounted by steel pins and magnet. The most innovative is the blocking disk with the ratchet, which ensures required angle of ROM.
1R orthodesign splints are innovative according to Reh4Mat rule: MiniMax (minimum brace and maximum effect).
Purpose of use
OKD-07 brace should be applied in cases of:
- knee dislocation,
- knee twist and sprain,
- side instability of the knee joint,
- knee ligaments LCL, MCL and ACL injuries
- knee ligaments reconstruction,
- other surgeries (orthopedic).
|Size||(A) Thigh circumference 15 cm above the center of the patella||(B) Calf circumference 15 cm below the center of the patella||How to measure|
|S||40-44 cm||30-34 cm|
|M||44,5-48 cm||34,5-38 cm|
|L||48,5-52 cm||38,5-42 cm|
|XL||52,5-56 cm||42,5-46 cm|
|XXL||56,5-60 cm||46,5-50 cm|
1R orthodesign splints
The orthopaedic splints 1R is the innovative solution with flexion and extension adjustment. The drop lock is very small (diameter: 30 mm) and provides 15° ROM adjustment. In addition, we apply the allen screws, which are mounted by steel pins and magnet. The most innovative is the blocking disk with the ratchet, which ensures required angle of ROM. In the short knee braces the splints 1R are universal, so they fit for both legs, but in the long knee braces the splints 1R have anatomic shape for right or left leg.
MiniMax is the first principle of REH4MAT that focuses on maximum effect in minimum device. Designing of our braces, we focus heavily on their effectiveness where, aside from functionality, the size of braces is significant. Unique constructions of our devices provide maximum safety and protection with little sizes. It allows to use comfortably our braces in sport shoes or under clothes.
Medical products class 1 – conforming the directive of the Board (93/42/EWG) concerning medical products. Producer of orthopedic and medical products, firma REH4MAT issued appropriate EC declaration of conformity.