Home » LOWER LIMB » Knee Braces » Stabilisation » Lower limb support IB-SK/1R GREY

Lower limb support IB-SK/1R GREY

The product is available while stocks last
Lower limb support IB-SK/1R GREY
4medic-en
Knee braceKnee brace
Class I medical deviceClass I medical device
CompressionCompression
Double-sidedDouble-sided
InvisibleInvisible
Skin-friendlySkin-friendly
Unicentric joint 1RUnicentric joint 1R
Brand: Code UNSPSC: Code UMDNS:

OPEN KNEE BRACE WITH 15° ROM ADJUSTMENT

Description

IBLight knee brace IB-SK/1R with the wrap around design is the professional medical device 1st class, which improves the gait and the rehabilitation process. The device contains four independent Velcro straps and two uniaxial anatomical side splints. This splints, during the movement, reflect the natural anatomical knee joint work, what prevents the changing of their position against the knee axial.

The IB braces group is the best solution, especially for seniors, with high quality and unrivalled price. Thanks to their sides stabilization, patients with chronic knee instability caused by joint degeneration, can walk without crutches and walking sticks. Furthermore, the IB braces has the wrap around construction, which is very helpful for putting it in and off.

IB-SK/1R is made of a structural material ProFit™. The side parts are made of innovative material called Active3D™.

Each IB brace is equipped with two anatomical shaped pads, which stabilize and support the patella.

The IB braces have four Velcro straps with plastic ends, what make the using easier.

Additionally, the product has anti-slip rubber band on the upper and lower internal parts of the brace.

IB-SK/1R

Purpose of use

IB-SK/1R was created for seniors suffered from chronic knee instability, caused joint degeneration and injuries.

  • after injury of the knee which didn’t require surgery (dislocation with damage of ligaments, muscle sprains and strains)
  • in postoperative rehabilitation as an prevention through knee contractures
  • joint degeneration and/or knee instability due to injury, illness in case of patients not qualified or refusing surgery treatment
  • atony of lower limbs in case of upright standing and learning to walk

 

It is possible to use a thinner pad under the drop lock.

Sizes

Size Knee circumference How to measure
S 30-34 cm
(11,8″-13,4″)
How to measure - knee circumference
M 34-38 cm
(13,4″-15″)
L 38-42 cm
(15″-16,5″)
XL 42-46 cm
(16,5″-18,1″)
XXL 46-50 cm
(18,1″-19,7″)

Total length of product: 36 cm (14,2″)

Colors

Gallery

Click on the photo to enlarge

IB-SK/1R/IB-SK/1R/IB-SK/1R/IB-SK/1R/IB-SK/1R/IB-SK/1R/IB-SK/1R/IB-SK/1R/IB-SK/1R/IB-SK/1R/IB-SK/1R/IB-SK/1R/IB-SK/1R/

Technology

MATERIALS

Active3D™

Active3D™ is thermoformed fabric made of special foamed, cell-closed designed material. It reduces the pressure on the body or any abrasions made by orthopaedic stays and aluminum splints. It is fully waterproof fabric and does not absorb sweat. It’s easy to clean. Due to its features, the fabric is an excellent product for making medical orthopaedic braces and orthoses. ACTIVE 3D™ has various external self-gripping layers. Our material has special, thermoformed properties and may be shaped according to the functional goals of the final braces.

ProFit™

ProFit™ is a double-layer fabric that is elastic in all directions and fits to limb precisely. The external side is made of spandex providing excellent compression and absorbs muscle shocks in physical activity. The internal side consists of microfibre, cotton and elastane what makes it skin-friendly, breathable and provides velvet softness. ProFit™ is friendly and neutral for the skin and has Oeko-Tex Standard 100 certificate. In some products this material can have an internal elastic cotton layer.

STIFFENINGS

Splint 1R Orthodesign

Szyna ortopedyczna 1R orthodesign, to nowatorskie podejście do tematyki szyn ortopedycznych z regulacją kąta zgięcia i wyprostu. Innowacyjność szyny polega na tym, że w zegarze o średnicy nie przekraczającej 30 mm, zastosowaliśmy regulację kąta zgięcia i wyprostu co 15 stopni. Dodatkowym atutem szyny jest to, że regulacja odbywa się nie przy użyciu wkrętów imbusowych, jak to się odbywało w poprzedniej generacji szyny, lecz za pomocą wkładanych stalowych nitów, które dla ułatwienia wyjmowane są z gniazd kątowych przy użyciu załączonego do szyn magnesu. Wisienką na torcie jest pierścień blokujący, który dzięki systemowi zapadkowemu nie pozwoli na samoczynne przestawienie się wcześniej ustawionego kąta. W ortezach kolana szyny mają odsadzenie goleniowe, co pozwala na bardziej precyzyjne dopasowanie ortezy kolana, a co za tym idzie dokładniej realizują regulację ruchomości stawu, w pozostałych wyrobach zaś, ortezy mają formę prostą. Od spodniej strony zegara zamontowano owalny element do którego doklejono gripper niezbędny do przymocowania do zegara miękkich poduszek bocznych 3D. Szyny te, przy użyciu klucza ortopedycznego będącego w ofercie Reh4Mat, mogą być w niektórych przypadkach indywidualnie dopasowane do kształtu kończyny pacjenta, poprzez ich lekkie dogięcie. Pobierz instrukcję regulacji szyny 1R orthodesign

PADDINGS

2D supports

2D supports are, apart from 3D supports, the second type of supports used in the production of orthoses. They are made of various types of relieving foams and have very different shapes. The special feature of these pelottes is that, unlike the 3D pelottes, they are not independent parts of the orthosis, but only their parts, that must be sewn between the materials from which the orthosis is made to work properly. These pads have an anatomical shape and are made of comfortable foam with proper hardness and elasticity, which guarantees the proper therapeutic effect.

3D supports

3D relief supports are independent technical solutions to relieve the rigid elements of a given orthosis. These elements are made of supporting foams or EVA foam. These foams are connected with various types of skin-friendly materials and materials with an adhesive function. These pads have the appropriate shape and color adapted to the type of orthosis. They relieve both metal elements of orthoses, such as splints, stays, underwires and orthopedic drop locks, as well as other elements that should not come into direct contact with the patient's skin. These pads have an anatomical shape and are made of comfortable foam with proper hardness and elasticity, guaranteeing the proper therapeutic effect.

Setting up

Downloads

Accessories

ACCESSORIES / PRODUCTS TO BE USED WITH

Code IB-SK/1R
Trade Name LOWER-EXTREMITY SUPPORT
Model LOWER-EXTREMITY SUPPORT IB-SK/1R

ON OUR WEBSITE WE PRESENT MEDICAL DEVICES.
USE THEM ACCORDING TO THE INSTRUCTIONS FOR USE OR LABEL.

CEMDClass I medical device in accordance with Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017. on medical devices.

MANUFACTURER / ADVERTISING ENTITY: REH4MAT Sp. z o.o.