WRAP AROUND LOWER LIMB BRACE WITH 15° ROM ADJUSTMENT
6 POINT BRACES
The braces are intended for long-time using in patients with complicated knee instability (partly or complete ACL rupture), which is result of early injuries (before or postoperative) or after joint conditions.
Anatomic profiled splints increase the control of knee movement and provide additionally support points in hinges of the brace (5 and 6 point) by using sides pellotes. It increases control of movement in frontal and rotation plate. The anatomic fitting the brace to the limb is supported by anatomic drop lock.
The AM-OSK-OL/1R-01 brace provides excellent knee stabilization, including frontal and sagittal plate and control of rotation movement, what allows to replace partly injured ligaments and articular capsule. The high level of stabilization allows for competitive training (especially in skiing) or allows for taking part in sport and other activities even in senior age.
The brace is made of innovative material ProSIX, which fits to limb’s shape precisely by stretching into all directions. The external side ProSIX is the reticulated textile, which fits to every surface and stabilizes knee precisely. This material assures great durability and resistance to mechanical damages. Thank to that, the brace can be used by patients during the long-term rehabilitation process. The medial layer of ProSIX is the duothermal distance foam, which is responsible for adequate thermal compression and skin breathing. The internal side is the terry material, which is soft for the patient’s skin and reduces the sweat.
The device is equipped with two independent support straps made of VELCRO tapes and two 2-axial sides splints 1R orthodesign.
UniPren is universal 3-layered fabric made of external elastic polyamide self-gripping layer and internal neoprene foam with elastic jersey. Our fabric is soft and elastic and not knitted, what prevents skin against the skin abrasions in the compression zones. The braces made of UniPren provide the best stabilization in market. Self-gripping function of UniPren allows to fit the brace precisely. Waterproof material.
We have provided high profiled splints 1R orthodesign in our braces to stabilize knee precisely. Using this splints allows to maintain the hinges in the axis joint during the physiological knee movement.
Purpose of use
Wrap-around lower limb brace with 15o ROM adjustment should be applied in cases of:
- knee dislocation,
- knee twist and sprain,
- side instability of the knee joint,
- knee ligaments LCL, MCL and ACL injuries
- knee ligaments reconstruction
- other surgeries (orthopedic),
|Size||(A) Thigh circumference 15 cm above the center of the patella||(B) Calf circumference 15 cm below the center of the patella||How to measure|
1R orthodesign splints
The orthopaedic splints 1R is the innovative solution with flexion and extension adjustment. The drop lock is very small (diameter: 30 mm) and provides 15o ROM adjustment. In addition, we apply the allen screws, which are mounted by steel pins and magnet. The most innovative is the blocking disk with the ratchet, which ensures required angle of ROM. In the short knee braces the splints 1R are universal, so they fit for both legs, but in the long knee braces the splints 1R have anatomic shape for right or left leg.
Medical products class 1 – conforming the directive of the Board (93/42/EWG) concerning medical products. Producer of orthopedic and medical products, firma REH4MAT issued appropriate EC declaration of conformity.