Home » SPINE BRACES » Thoracic-lumbar orthoses » Torso support EB-LK

Torso support EB-LK

Torso support EB-LK
4medic-en
TLSOTLSO
Anatomic staysAnatomic stays
Class I medical deviceClass I medical device
EfficiencyEfficiency
OrthopedicsOrthopedics
Recommended by specialistsRecommended by specialists
Skin-friendlySkin-friendly
Brand: Code UNSPSC: Code UMDNS:
Code NFZ:

Run

HIGH DORSO-LUMBO-SACRAL BACK SUPPORT

Description

High dorso-lumbo-sacral back support RUN is the highest brace of our range, providing full support and stabilization of dorsal, lumbar and sacral part of the spine. The brace is anatomically shaped.

The back part of support is made of innovative material Active3D™.

The Back Support is provided with anatomically shaped metal stays (sweat-resistant coating), which quantity depends on the size; 4 or 6 metal stays. The orthosis incorporates semi-rigid Back Plate which function is to provide reinforcement of lumbar stabilization.

EB-LK

The lateral sides are made of strong multi-dimensional orthopaedic rubber AirRubber™, which properties consists in 3D construction textile very breathable with unidirectional elasticity, offering compression and stabilization of area.

The back compression is obtained by three layers, elastic tensioners to regulate the compression and/or traction for the back medium dorso-lumbar region.

Easy to apply due to the closure system with hand grip pockets, specially developed for patient with hands disability.

The regulation of the back compression is obtained by double fastening made of orthopaedic rubber AirRubber III™, non-elastic tapes and anatomically shaped system of buckles. The ends of closures are provided with plastic covers specially developed for patients with limited dexterity, such as osteoarthritis.

The system GRIP & OPEN makes the orthosis easy to assemble and disassemble.

Properties

– SKIN FRIENDLY PRODUCT – lumber support has been made of special orthopaedic rubber, containing mainly cotton, which is neutral to patient’s skin
– EFFECTIVENSS OF STABILIZATION – thanks the orthopaedic nibs and correctly worked out shape, the stabilization is exceptionally good.
– COMFORT OF USAGE – the limber support is hardly noticeable on patient’s body thanks to its skin-color.

Indications

– Pre- and Post-Surgical Stabilization
– Degenerative Spinal pathologies
– Disc Hernia
– Spondylolithesis
– Spondylolysis
– Acute Back Pain
– Spine Instability
– Rehabilitation and Prevention

Sizes

Size Waist circumference How to measure
S* 65-75 cm
(25,6″-29,5″)
How to measure - waist circumference
M 75-85 cm
(29,5″-33,5″)
L 85-97 cm
(33,5″-38,2″)
XL 97-110 cm
(38,2″-43,3″)
XXL 110-125 cm
(43,3″-49,2″)
XXXL* 125-145 cm
(49,2″-57,1″)

* – available while stocks last

Total height of the product:
front: 19 cm (7,5″)
back: 33 cm (13″)

Gallery

Click on the photo to enlarge

EB-LK/EB-LK/EB-LK/EB-LK/EB-LK/EB-LK/EB-LK/EB-LK/

Technology

MATERIALS

Active3D™

Active3D™ is thermoformed fabric made of special foamed, cell-closed designed material. It reduces the pressure on the body or any abrasions made by orthopaedic stays and aluminum splints. It is fully waterproof fabric and does not absorb sweat. It’s easy to clean. Due to its features, the fabric is an excellent product for making medical orthopaedic braces and orthoses. ACTIVE 3D™ has various external self-gripping layers. Our material has special, thermoformed properties and may be shaped according to the functional goals of the final braces.

AirRubber III™

AirRubber III™ has unidirectional elasticity. It can be stretched, increasing the length, not width, what improves compression. Between the braids air flows freely and skin can breathe. In addition in high compression, these rubber braids provide a gentle massage for skin. Our orthopedic rubber is very friendly for skin.

AirRubber™

AirRubber™ has unidirectional elasticity and it’s breathable. This lamination is perforated. Between the braids air flows freely and skin can breathe. In addition in high compression, these rubber braids provide a gentle massage for skin. Our orthopedic rubber is very friendly for skin.

STIFFENINGS

Lumbar supports

Low and high lumbar supports are made of polyethylene injection technology. The supports are embossed in the shape of the vertebrae of the spine, thanks to which it does not press on the spine, but relieves the back muscles. The product is equipped with the manufacturer's logo and a path for the seam. They stiffen the lumbar or thoracolumbar spine, relieve the muscle and stabilize the compression bands of the braces.

Lumbar supports

Orthopedic profiled stays

Orthopedic stays are made of special spring steel, covered with a plastic coating and have rounded and protected ends. They can come in various widths and thicknesses as well as different hardness. They can be pre-shaped or flat. They work in one direction and adapt to the shape of the body while stabilizing the laterally protected part of the body. They are perfectly protected against corrosion, so they are resistant to water, moisture and sweat. Products equipped with them can be washed without removing them from the orthosis. They adjust to the body. The orthopedic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

Orthopedic profiled stays

Plastic stays

They come in various widths and thicknesses, are made of various types of plastics, such as polyamide, ABS or acrylic, and these features determine their stiffness. Thanks to their design, they are resistant to water, moisture and sweat. Products equipped with them can be washed without having to remove them from the orthosis. Our plastic stays work only in one direction, perfectly stabilize the laterally protected part of the body, adjusting to it at the same time and have a memory function, thanks to which they always return to their original shape. This function causes the stays in the orthosis to stabilize the swollen limb immediately after the injury and after the swelling has come off. The plastic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

PADDINGS

3D supports

3D relief supports are independent technical solutions to relieve the rigid elements of a given orthosis. These elements are made of supporting foams or EVA foam. These foams are connected with various types of skin-friendly materials and materials with an adhesive function. These pads have the appropriate shape and color adapted to the type of orthosis. They relieve both metal elements of orthoses, such as splints, stays, underwires and orthopedic drop locks, as well as other elements that should not come into direct contact with the patient's skin. These pads have an anatomical shape and are made of comfortable foam with proper hardness and elasticity, guaranteeing the proper therapeutic effect.

Setting up

Downloads

Code EB-LK
Trade Name SUPPORT, TORSO
Model back brace EB-LK

ON OUR WEBSITE WE PRESENT MEDICAL DEVICES.
USE THEM ACCORDING TO THE INSTRUCTIONS FOR USE OR LABEL.

CEMDClass I medical device in accordance with Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017. on medical devices.

MANUFACTURER / ADVERTISING ENTITY: REH4MAT Sp. z o.o.