Home » SPINE BRACES » Lumbar-sacral orthose… » LOWER BACK BRACE…
Brand: . Code NFZ: , . Code UNSPSC: . Code UMDNS: .


Lumbar back support AM-SO-06


Product description

AM-SO-06 lumbar back support with double closure panels was developed in order to improve the stabilization level on the spine maintaining comfort and its functionality for the patient.

The orthosis was developed according to anatomical shape, allowing the perfect fitting and adequate stabilization level of lumbar area.

The Back part of orthosis is made of ActivExpanse.


It is an innovative, active 3D lamination with high air permeability. This spacer material is light made of 2 parts: external polyamide durable 3D layer and skin-friendly cotton layer with Oeko-Tex Standard 100 certificate. ActivExpanse is not elastic what improves stabilization. External 3D spacer layer is hypoallergenic and provides high air permeability and minimal water and moisture absorption. Our medical devices made of this fabric are very comfortable.

Side parts are made of ActivRubber II.

ActivRubber II is strong and bidirectional elasticity. It can be stretched, increasing the length and width, what improves compression. Between the braids air flows freely and skin can breathe. In addition in high compression, these rubber braids provide a gentle massage for skin. Our orthopedic rubber is very friendly for skin.

The Orthosis is provided with anatomically shaped metal stays (sweat-resistant coating), which quantity depends on the size; 4 or 6 metal stays in the Back.

The Front Panel closure is composed of four independent closures, made in semi-rigid medical laminate covered by velcro adherence textile and soft cotton terry-cloth in contact with the skin of patient. The Double closure construction makes the orthosis easy-fitting to different body shapes (especially recommended for women).

In order to allow the easy fitting and correct adjustment on the patient body, the Back Support is provided with two edges in the Front, to park the flaps of velcro tensioners.

In order to improve the functionality of the product, the orthosis is equipped with two sets of three- layer elastic tensioners, which offer high stabilization and support on lumbar and sacro-lumbar area.

Orteza lędźwiowa AM-SO-06

Orteza lędźwiowa AM-SO-06

Orteza lędźwiowa AM-SO-06

Orteza lędźwiowa AM-SO-06

Orteza lędźwiowa AM-SO-06

Available sizes

Size Waist circumference How to measure
S 65-75 cm
How to measure - waist circumference
M 75,5-85 cm
L 85,5-97 cm
XL 97,5-110 cm
XXL 110,5-125 cm
XXXL 125,5-145 cm


- SKIN FRIENDLY PRODUCT – lumber support has been made of special orthopaedic rubber, containing mainly cotton, which is neutral to patient’s skin
- EFFECTIVENSS OF STABILIZATION – the stabilization is exceptionally good thanks to the orthopaedic nibs, tightening rubber belts crossed at the back and anatomically shaped loin pillow.
- SAFETY – the front tightening rubber belts provide additional protection and the chances of the device to undo accidentally are eliminated.
- COMFORT OF USAGE – the limber support is very light and therefore comfortable to wear.


- Pre- and Post-Surgical Stabilization
- Degenerative Spinal pathologies on Lumbar area
- Disc Hernia
- Lumbar Muscles and Ligamentous Strains and Sprains
- Postural Support
- Chronic Low Back Pain
- Rehabilitation and Prevention

Setting up

Setting up

Optional equipment

Silicone pressure pad

Silicone pressure pad


Thermoforming pad AM-PT


Code AM-SO-06
Model Back brace AM-SO-06

CEMedical products class 1 – conforming the directive of the Board (93/42/EEC) concerning medical products. Producer of orthopedic and medical products, firm REH4MAT issued appropriate EC declaration of conformity.