Home » SPINE BRACES » Thoracic-lumbar orthoses » Spinal orthosis AM-WSP-01 BEIGE

Spinal orthosis AM-WSP-01 BEIGE

The product is available while stocks last
Spinal orthosis AM-WSP-01 BEIGE
4green-en
TLSOTLSO
BreathableBreathable
Chemical freeChemical free
Class I medical deviceClass I medical device
Latex-freeLatex-free
Skin-friendlySkin-friendly
Brand: Code UNSPSC: Code UMDNS:
Code NFZ:

HIGH DORSOLUMBAR BACK BRACE

Description

LOWER BACK PAIN

Up to 80% of people will suffer from back pain at some point in their lifetime. The spine consists of various parts: muscles, ligaments, tendons, bones and intervertebral discs. Problems with any of these structures result in back pain.

There is 2 types of back pain: acute (pain lasts 3 months or less) and chronic (longer than 3 months).

What are the common causes of back pain? Together with injuries the heavy lifting, poor posture, obesity or osteoporosis are only some of many causes.

For reducing the pressure on backbone you should use professional back brace AM-WSP-01.

Product description

Back brace AM-WSP-01 should be used in case of physical activity during acute or chronic back pain.

Everyday’s standing, lifting, bending causes overusing the spine. When you wear our AM-WSP-01 back brace which is equipped with anatomic-shaped aluminum splints, your spine is off loaded. The overloading forces are cumulated in these aluminum stays what supports the backbone and its structures.

The brace is made of skin friendly and breathable material ProFit™:

The brace has tightening belts made of AirRubber™.

Purpose of use

– lower back pain
– lower back injuries/stressed fractures
– lower back strain/sprain
– poor posture
– pregnancy
– arthritis
– herniated disk
– sciatica
– after surgieries

Sizes

Size Waist circumference How to measure
S 65-75 cm
(25,6″-29,5″)
How to measure - waist circumference
M 75-85 cm
(29,5″-33,5″)
L 85-97 cm
(33,5″-38,2″)
XL 97-110 cm
(38,2″-43,3″)
2XL 110-125 cm
(43,3″-49,2″)
3XL 125-145 cm
(49,2″-57,1″)
4XL 145-155 cm
(57,1″-61″)

Total height of the product:
Front: 20 cm
Back: 30 cm

Colors

Gallery

Click on the photo to enlarge

AM-WSP-01/AM-WSP-01/AM-WSP-01/AM-WSP-01/AM-WSP-01/

Technology

MATERIALS

AirRubber™

AirRubber™ has unidirectional elasticity and it’s breathable. This lamination is perforated. Between the braids air flows freely and skin can breathe. In addition in high compression, these rubber braids provide a gentle massage for skin. Our orthopedic rubber is very friendly for skin.

ProFit™

ProFit™ is a double-layer fabric that is elastic in all directions and fits to limb precisely. The external side is made of spandex providing excellent compression and absorbs muscle shocks in physical activity. The internal side consists of microfibre, cotton and elastane what makes it skin-friendly, breathable and provides velvet softness. ProFit™ is friendly and neutral for the skin and has Oeko-Tex Standard 100 certificate. In some products this material can have an internal elastic cotton layer.

STIFFENINGS

Lumbar supports

Low and high lumbar supports are made of polyethylene injection technology. The supports are embossed in the shape of the vertebrae of the spine, thanks to which it does not press on the spine, but relieves the back muscles. The product is equipped with the manufacturer's logo and a path for the seam. They stiffen the lumbar or thoracolumbar spine, relieve the muscle and stabilize the compression bands of the braces.

Lumbar supports

Orthopedic profiled stays

Orthopedic stays are made of special spring steel, covered with a plastic coating and have rounded and protected ends. They can come in various widths and thicknesses as well as different hardness. They can be pre-shaped or flat. They work in one direction and adapt to the shape of the body while stabilizing the laterally protected part of the body. They are perfectly protected against corrosion, so they are resistant to water, moisture and sweat. Products equipped with them can be washed without removing them from the orthosis. They adjust to the body. The orthopedic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

Orthopedic profiled stays

Plastic stays

They come in various widths and thicknesses, are made of various types of plastics, such as polyamide, ABS or acrylic, and these features determine their stiffness. Thanks to their design, they are resistant to water, moisture and sweat. Products equipped with them can be washed without having to remove them from the orthosis. Our plastic stays work only in one direction, perfectly stabilize the laterally protected part of the body, adjusting to it at the same time and have a memory function, thanks to which they always return to their original shape. This function causes the stays in the orthosis to stabilize the swollen limb immediately after the injury and after the swelling has come off. The plastic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

Profiled aluminum stays, spine stabilizers

These are splints and orthopedic stays of various thickness and width, which are made of various types of aluminum alloys. All these splints and stays, before mounting to a given orthosis, have been pre-profiled, which allows for fitting the product to the body of a specific patient. However, for the correct operation of the device, they should be precisely bent to the patient's body by an orthopedist, physiotherapist or orthopedist technician. Only this action guarantees the proper protection and support of the patient's body.

Profiled aluminum stays

Setting up

Downloads

Accessories

ACCESSORIES / PRODUCTS TO BE USED WITH

Code AM-WSP-01
Trade Name SPINAL ORTHOSIS
Model Back brace AM-WSP-01

ON OUR WEBSITE WE PRESENT MEDICAL DEVICES.
USE THEM ACCORDING TO THE INSTRUCTIONS FOR USE OR LABEL.

CEMDClass I medical device in accordance with Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017. on medical devices.

MANUFACTURER / ADVERTISING ENTITY: REH4MAT Sp. z o.o.