The 1R orthodesign orthopedic splint is a novel approach to the subject of orthopedic splints with flexion and extension angle adjustment. The innovativeness of the splint lies in the fact that in a hinge dial with a diameter not exceeding 30 mm, we have applied flexion and extension angle adjustment every 15 degrees. An additional advantage of the splint is that the adjustment is not done using Allen screws, as was the case in the previous generation of the splint, but by means of inserted steel pins, which, for convenience, are removed from the angle sockets using a magnet included with the splints. The icing on the cake is the locking ring, which, thanks to a ratchet system, will not allow the previously set angle to change spontaneously. In knee braces, the splints have a tibial offset, which allows for a more precise fit of the knee brace, and consequently, they more accurately execute the regulation of joint mobility, while in other products, the braces have a straight form. On the underside of the hinge dial, an oval element is mounted to which a gripper is glued, necessary for attaching soft 3D side pads to the dial. These splints, using an orthopedic wrench available in the Reh4Mat offer, can in some cases be individually adapted to the shape of the patient's limb by bending them slightly.Download the adjustment instructions for the 1R orthodesign splint
