Lower limb support AM-OSK-O/1R-01

The wrap-around knee brace is made of perforated perforated foam, which is coated with lining fabric. It holds two independent supported sets of the Velcro tapes. The device is equipped with two sided, shaped splints with special drop lock allowing for ROM adjustment in every 15°. this precise adjustment facilities the rehabilitation process. The system of splints in open knee brace is arranged in a shape of X letter, which allows to adhere perfectly to the limb and also enables to stabilize the joint precisely. This internal perforation allows skin to breath and reduces overheating. The wrap around design enables to use the brace by seniors or overweight people.

Purpose of use

AM-OSK-O/1R-01 brace should be applied in cases of:

• knee dislocation,
• knee twist and sprain,
• side instability of the knee joint,
• knee ligaments LCL, MCL and ACL injuries,
• knee ligaments reconstruction,
• other surgeries (orthopedic).

It is possible to use a thinner pad under the drop lock.

Size	Knee circumference	How to measure
S	30-34 cm (11,8″-13,4″)
M	34-38 cm (13,6″-15″)
L	38-42 cm (15,2″-16,5″)
XL	42-46 cm (16,7″-18,1″)
XXL	46-50 cm (18,3″-19,7″)
XXXL	50-55 cm (19,9″-21,7″)
XXXXL	55-59 cm (21,9″-23,2″)

Total length of product: 36 cm (14,2″)

Click on the photo to enlarge

MATERIALS

ProSix™

ProSix™ is an innovative fabric 3D, elastic in all directions and fitting to the limb precisely. The external layer is 3D material providing excellent stabilization. There is duothermic spacer foam providing high air permeability and compression inside. The skin has contact with cotton that is breathable and soft. ProSix™ is friendly and neutral for the skin and has Oeko-Tex Standard 100 certificate.

TECHNOLOGICAL SYSTEMS

EASY FIT Solution

The patented EASY FIT SOLUTION system is designed to enhance the fit of products to body curves and therapeutic needs of users. The system is intended for injury stabilization and posture correction.
It consists of universal inserts, which allow for the attachment of clips with elastic elements of the stabilization system and provide angular movement, enabling precise adjustment of products to the user's body curves.
Additionally, the inserts allow for circumferential guidance of straps, providing circumferential stabilization of the selected area. The system is attached to soft components of products such as lower and upper limb orthoses, vests, or circumferential belts.
EASY FIT SOLUTION enables combining rigid components (splints, bars) with elastic straps, providing an individual approach when using standard rehabilitation equipment.

STIFFENINGS

Splint 1R Orthodesign

The 1R orthodesign orthopedic splint is a novel approach to the subject of orthopedic splints with flexion and extension angle adjustment. The innovativeness of the splint lies in the fact that in a hinge dial with a diameter not exceeding 30 mm, we have applied flexion and extension angle adjustment every 15 degrees. An additional advantage of the splint is that the adjustment is not done using Allen screws, as was the case in the previous generation of the splint, but by means of inserted steel pins, which, for convenience, are removed from the angle sockets using a magnet included with the splints. The icing on the cake is the locking ring, which, thanks to a ratchet system, will not allow the previously set angle to change spontaneously. In knee braces, the splints have a tibial offset, which allows for a more precise fit of the knee brace, and consequently, they more accurately execute the regulation of joint mobility, while in other products, the braces have a straight form. On the underside of the hinge dial, an oval element is mounted to which a gripper is glued, necessary for attaching soft 3D side pads to the dial. These splints, using an orthopedic wrench available in the Reh4Mat offer, can in some cases be individually adapted to the shape of the patient's limb by bending them slightly. Download the adjustment instructions for the 1R orthodesign splint

PADDINGS

3D supports

3D relief supports are independent technical solutions to relieve the rigid elements of a given orthosis. These elements are made of supporting foams or EVA foam. These foams are connected with various types of skin-friendly materials and materials with an adhesive function. These pads have the appropriate shape and color adapted to the type of orthosis. They relieve both metal elements of orthoses, such as splints, stays, underwires and orthopedic drop locks, as well as other elements that should not come into direct contact with the patient's skin. These pads have an anatomical shape and are made of comfortable foam with proper hardness and elasticity, guaranteeing the proper therapeutic effect.

• Declaration of Conformity EC
• Manual
• Manual (other languages)
• Setting up

ACCESSORIES / PRODUCTS TO BE USED WITH

Protective sleeve for the brace AM-RB

PCL KIT