Home » LOWER LIMB » Ankle and Foot Braces » Compensation » Foot support AM-OSS-10

Foot support AM-OSS-10

Foot support AM-OSS-10
4medic-en
Foot braceFoot brace
Class I medical deviceClass I medical device
CompensationCompensation
Foot dropFoot drop
InnovativeInnovative
InvisibleInvisible
NeurologyNeurology
Recommended by specialistsRecommended by specialists
WaterproofWaterproof
Brand: Code UNSPSC: Code UMDNS:
Code NFZ:

ACTIVE ANKLE BRACE FOR A FOOT DROP

Description

The brace AM-OSS-10 helps to bring the lost functions back by active supporting the dorsiflexion in hemiplegia, spasticity after stroke or dysfunction of nervous system.

The brace is made of AeroSpace™.

Rubbers made of AirRubber III™

High-quality materials and physiological shape of the brace provide good efficiency connected with functional and sensomotoric therapy.

The brace improves the foot lifting and corrects its loading. NeuroActive corrects foot inversion passively and actively with special straps and helps extensor muscles work and increase the length of steps.

The product is equipped with side stiffeners and rear plastic stays.

Purpose of use

  • limited dorsiflexion
  • extensor muscles weakness and spasticity as an result of: stroke, SM, common peroneal nerve dysfunction etc.

Sizes

Size Heel circumference How to measure
S 27 – 30 cm
(10,6″-11,8″)
M 30 – 33 cm
(11,8″-13″)
L 33 – 36 cm
(13″-14,2″)
XL 36 – 39 cm
(14,2″-15,4″)

Right and left ankle specific.

Total height of the product:
S – XL: 25 cm

Gallery

Click on the photo to enlarge

////////AM-OSS-10/

Technology

MATERIALS

ActiveSpace™

ActiveSpace™ is a spacer, polyamide 3D lamination with high skin ventilation. It is very lightweight, consisted of 2 layers. Between them, we use polyamide braids. ActiveSpace™ is not elastic what improves stabilization. Inside the lamination, between 2 layers, the air flows freely, maintaining minimal water and moisture absorption. Waterproof material.

ActiveSpace™

AeroSpace™

AeroSpace™ is an innovative new generation raw material. It is a distance elastic 3D knitted fabric consisting of two layers of facings and an interlacing that creates the appropriate thickness of the raw material and has relieving properties. The knitwear is made of the highest quality polyester yarn - guaranteeing high mechanical strength and spandex ensuring its proper flexibility. This material is characterized by a very low weight, high flexibility and a very large openwork structure, allowing for very easy drainage of sweat from the body and bringing fresh air to the skin. Products made of this raw material are neutral to the secured joint, do not heat or cool it, but ensure its proper compression and fit and reduce muscle vibrations generated during physical exertion. Its thickness and 3D structure perfectly relieves the orthopedic splints, stays or other elements mounted on the product and guarantees velvety softness to the touch.

AirRubber III™

AirRubber III™ has unidirectional elasticity. It can be stretched, increasing the length, not width, what improves compression. Between the braids air flows freely and skin can breathe. In addition in high compression, these rubber braids provide a gentle massage for skin. Our orthopedic rubber is very friendly for skin.

STIFFENINGS

Orthopedic stays from ABS

Orthopedic stays available in various width, thickness and shapes are cut from ABS boards. Their role is not to stiffen the orthosis in order to support a joint or other part of the body, but to prevent wrinkling and uncontrolled movement of the fabrics of the orthosis./p> Orthopedic stays from ABS

Plastic stays

They come in various widths and thicknesses, are made of various types of plastics, such as polyamide, ABS or acrylic, and these features determine their stiffness. Thanks to their design, they are resistant to water, moisture and sweat. Products equipped with them can be washed without having to remove them from the orthosis. Our plastic stays work only in one direction, perfectly stabilize the laterally protected part of the body, adjusting to it at the same time and have a memory function, thanks to which they always return to their original shape. This function causes the stays in the orthosis to stabilize the swollen limb immediately after the injury and after the swelling has come off. The plastic stays cannot bend and that is why, they cannot correct the body posture or the secured joint.

Stiffeners of thin ABS

Stiffeners made of a thin ABS plate are very light and protect the correct shape of the brace, but do not stiffen individual parts of the patient's body. The brace has the correct circumferential shape, but does not have the compensating and stiffening function of the protected joints and other protected parts of the body.

Stiffeners of thin ABS

Setting up

Downloads

Code AM-OSS-10
Trade Name ANKLE ORTHOSIS
Model ANKLE ORTHOSIS AM-OSS-10

ON OUR WEBSITE WE PRESENT MEDICAL DEVICES.
USE THEM ACCORDING TO THE INSTRUCTIONS FOR USE OR LABEL.

CEMDClass I medical device in accordance with Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017. on medical devices.

MANUFACTURER / ADVERTISING ENTITY: REH4MAT Sp. z o.o.