ELBOW BRACE WITH HAND GRIP AND ROM ADJUSTMENT
T-Range is the 1-axial telescopic elbow brace with hand grip and ergonomic range of motion adjustment. The length adjustment is possible by using maintenance-free device called press-slide.
Our brace was created to treat and control the elbow range of motion, caused by fractures, dislocations or strains.
The brace is made of elastic plastic caps that shape according to the forearm and arm anatomy. The hand grip is covered by special friendly foam. Soft sleeves, under the caps, are easy to attach. Thanks of universal length of sleeves, you can fit them to every patients.
T-Range elbow brace is equipped with straps with karabiner what allows patient to put the brace on very easy. In addition, the length of strap is possible to adjust what allows to fit the brace precisely.
1R orthodesign splint, that exists in our elbow brace, is the innovative solution with elbow range of motion adjustment in every 15°.
Also, the hand grip allows to protect the forearm against the unrequired pronation and supination.
Our elbow brace is one of the most lightweight, telescopic and comfort elbow braces on the market.
Low weight, one circumference and excellent fitting – they’re only some assets of our elbow brace T-Range!
The brace is made of skin-friendly material AirDistance II.
AirDistance II is an innovative technological fabric. It’s 3-layered lamination, made of 3 parts: durable and self-gripping and polyamide layer, off-loading EVA foam and polyamide 3D spacer material. External part is used to attach hard components. EVA foam off-loads these splints and internal 3D spacer layer provides high air permeability and minimal water and moisture absorption. It is also waterproof.
Purpose of use
- fractures of distal humerus, elbow and proximal forearm bones
- po-op elbow support
- tendons and ligaments injuries or repairs
- chronic elbow injures
- collateral ligaments reconstruction
- elbow hyperextension
- biceps and triceps tendon repairs
|Size||The length from the lateral epicondyle of the humerus to the wrist||How to measure|
|Single size||min 23 cm – max 32 cm
(min 9,1″ – max 12,6″)
|Size||Arm circumference 6 cm above the center of the elbow (A)||Forearm circumference 6 cm below the center of the elbow (B)||How to measure|
|Single size||min 22 cm – max 44 cm
(min 8,7″ – max 17,3″)
|min 22 cm – max 36 cm
(min 8,7″ – max 14,2″)
Left/right side available.
MiniMax is the first principle of REH4MAT that focuses on maximum effect in minimum device. Designing of our braces, we focus heavily on their effectiveness where, aside from functionality, the size of braces is significant. Unique constructions of our devices provide maximum safety and protection with little sizes. It allows to use comfortably our braces in sport shoes or under clothes.
Splints 1RE – single axis orthopedic splints, used mainly in knee joint, upper limb and hip joint braces. The characteristic quality of this splint is, apart from wide range of motion adjustment in every 15 degrees, is also hyperextension adjustment in the secured range of -15 and -30 degrees. The splints are characterized by perfect lateral joint stabilization and low weight. The set-up of the angle adjustment clock doesn’t require any tools, and special safety system prevents the change of the angle by unauthorized people. The splints are made of high quality aluminium alloy and plastic with carbon fibre. They are light and neutral to the influence of sweat and salt, properly firm, assuring correct functioning of the device. Standard length of the splints is: 380, 470 and 530 mm. The splint and its design are patented in European Union by Reh4Mat company.
Press-slide System – Regulation of the length of splint
Press-slide system is the another technological newness in our offer that we would like to introduce to You with a great pleasure. The regulator of the length of splint Press-slide is the element of orthopaedic braces, designed especially according to the innovative rule – MiniMax (minimum choice, maximum effect). That is why, orthopaedic devices equipped with Press-slide system may be characterized by small dimensions, very low weight and significant ergonomics of usage. What is more, the system was engineered to facilitate the extension or the shortening of the splint to the patient in the most easy and safe way. Press-slide was made of special kind of plastic strengthened by fiberglass and thanks to that solution its durability is much more noticeable than in case of aluminium. The regulation of splints is very easy – you just need to press the special button and regulate the splint so that it would be fully comfortable for you. To make that activity easier, on the surface of the lower limb splints we placed the centimeter scale that defines the distance between knee joint and the end of thigh splint and shin splint. Regarding upper limb braces, we placed the scale that simplifies the repeatable splint regulation.
Medical products class 1 – conforming the directive of the Board (93/42/EEC) concerning medical products. Producer of orthopedic and medical products, firm REH4MAT issued appropriate EC declaration of conformity.